5 steps for proper cleaning of the roof

Between the right equipment and the right technique, we explain in 5 steps how to effectively clean your roof and protect it

Complete cleaning of the program! From tile to gutters, cleaning the roof requires minimal preparation and anticipation. You will need to prepare to climb on the roof safely, then to remove the muscle and effectively protect the tiles in your house against the elements. The cleaning operation is underway!

5 steps for proper cleaning of the roof

Steps:

  • Things to know before cleaning your roof
  • How do you get on the roof to clean it?
  • Foam operation on the roof
  • Thoroughly clean the roof and protect it
  • Clean the gutters

1. Things to know before cleaning your roof

Ideally, you should clean your roof twice a year. Once in the spring to make sure the winter did not cause too much damage. And once in late autumn, when all the dead leaves have finished falling, prepare the roof for winter. Adapt to the weather to avoid climbing on the roof when the wind is strong or when it is too hot. Do not compromise your safety: make sure you take all necessary precautions before embarking on this flight mission!

2. How do you get on the roof to clean it?

The first step and last but not least: get on the roof. This mission requires your full attention.

  • Work with support for your safety!
  • Equip yourself with good shoes so that they do not slip.
  • Use a suitable ladder (between 100 and 160 $ depending on the height) and remember to put a feather at his feet to prevent movement. Moreover, leave 1 m of edge between the top of the stairs and the bottom of the roof, so that you never have to climb the last steps (too dangerous).
  • Equip yourself with a protective harness. You’re never too careful.
  • Once on the roof, don’t forget to secure the ladder to the roof using the safety hooks.

3. Operation of the foam on the roof

You will need to start by removing the installed muscle and lichen. Although it can erode the tiles, you can use a pressure washer (Karcher type) working from the top of the roof down. Another option, less harmful to the roof: with a hard brush and soapy water, before rinsing, always from top to bottom. Tip : To limit the appearance of moss on the roof, be sure to cut down the surrounding trees and cut the vegetation that grows along the facades of your home.

4. Thoroughly clean the roof and protect it

After the foam removal operation, if the weather is nice and there is no wind, spray the roof with anti-foam. To completely protect it from the weather (frost, rain, snow, etc.), you can also apply a water-repellent treatment that will reduce the porosity of the tiles, making them smooth. Waterproof and waterproof!

Good to know: to be effective, the water-repellent treatment must rest for 24 hours. To check, put water on the plates. If the water slips, the treatment is effective. On the other hand, if water is absorbed, you will need to resume water repellent treatment.

5. Clean the gutters

The last step of major roof cleaning in Federal, Way: the gutter. First, make sure your ladder is steadily positioned, then remove most of the leaves and branches by hand (or using a gardening trowel). For thorough cleaning, you can use a strong jet of water while monitoring the drains so that the pipes do not clog as you walk.

Leave a comment

Design a site like this with WordPress.com
Get started